Aimpoint CompM4 & CompM4s Sight 2 MOA w/ QRP2 Mount
The Aimpoint CompM4 series of sights are the finest sights that Aimpoint has ever produced. Improvements include improved energy efficiency that provides up to 8 years of continuous use from a single AA battery! The CompM4 sights incorporate an integral mount that eliminates the need for a separate ring, and can be customized with vertical and forward spacers to fit a variety of weapon systems. They can also be used by hunters and sport shooters that need night vision compatibility.
The CompM4 is now the latest version of the US Army’s M68 CCO (Close-Combat Optic), continuing a legacy that Aimpoint has maintained since 1997. Having procured over 750,000 Aimpoint sights, the U.S. military continues to put their trust in Aimpoint quality
The performance of the CompM4 series of sights is optimized for use with all generations of night vision devices (NVDs), but is especially suited for 3rd generation night vision technology. Aimpoint’s unique band-pass coating on the front lens reflects select frequencies of red light at near 100% efficiency in order to give the highest possible dot brightness with the smallest amount of energy while transmitting nearly 100% of light in the Infrared and near-infrared part of the spectrum to provide the clearest, brightest image possible when used with a 3rd generation NVD. With 7 NVD-compatible brightness settings and 9 Daylight settings including one extra-bright setting, the CompM4 and CompM4s are ready for use around the clock.
The electronic components in the CompM4 improve upon Aimpoint s existing stateof- the-art ACET diode circuitry, allowing this new sight to run constantly for over 8 years on a single AA battery. The CompM4 features an internal voltage regulator that allows the sight to operate on any AA size battery available worldwide. This sight features a 2 minute-of-angle (MOA) dot size, making it perfectly suited for use with Aimpoint s 3XMagnifier scope module. The CompM4 is optimized for use with all generations of night vision devices, and features an extremely rugged and easy to use 16-position manual switch with 7 night vision compatible settings and 9 daylight settings. The CompM4 sight body is designed to protect both the optics and adjustment components against hard use, and is waterproof to 45 meters (150 feet).
The CompM4 also features an improved QRP2 Picatinny rail mount, eliminating the need for a separate mounting ring. This mount has over twice the clamping force of the original QRP, and features a lower and wider torque limiting knob to improve ease of use and lessen the chance of the sight base becoming snagged on other equipment. The mount is keyed into the sight to absorb recoil forces. Vertical and cantilever spacers are available to allow the sight to fit on all M16 rifle and M4 carbine variants. The sight can also be used on any other weapon with a Picatinny rail mounting system.
The Aimpoint CompM4 series of sights are available in two versions:
- The CompM4 offers a high battery compartment.
- The CompM4s offers a low battery compartment giving the sight a lower overall profile, and placing the switch and battery compartment in a more protected position while preserving all of the outstanding features of the standard CompM4 sight.
In all other aspects, the Aimpoint CompM4 and Aimpoint CompM4s are identical.
Aimpoint CompM4 & CompM4s features:
- Compatible with every generation of Night Vision Devices (NVD)
- Super ACET technology allows up to 80,000 hours (over 8 years) of daytime operation on one AA battery
- Internal voltage regulator allows the CompM4 to be used with any AA size battery.
- Seven night vision compatible settings and 9 daylight settings
- QRP2 mount has twice the clamping force of the original QRP, and the mounting knob is wider and shorter to improve operation, and lessen the chance of becoming snagged on other gear.
- Mount base is “keyed” into to the body of the sight to absorb recoil.
- Mount base screws directly into the sight – no separate sight ring is required.
- 500,000 hours of use on NVD setting
- 2 MOA dot for close combat and long distance engagement
- Matches perfectly with Aimpoint 3XMag, (magnifier module).
- Unequalled light transmission.
- Front lens opening is threaded for addition of killFlash® anti-reflective device.
- Submersible to 150 feet (45 meters)
- Optical coating Anti Reflex coating all surfaces. Multi-layer coating for reflection of Pass coating for NVD compatibility
- Standardized as the US Army’s new M68CCO
- Improved adjustment caps are easier to remove, and are protected against impact.
- Can be used with a carry handle adaptor for use on all M16 rifles.
- Switch, dot brightness 16 positions, 7 NVD, 9 daylight, of which 1 Extra bright
- Temperature Range -45°C to +71°C (-50°F to 160°F)
Aimpoint CompM4 & CompM4s Optical Data:
- System Passive Red Dot Collimator Reflex Sight
- Magnification 1X
- Eye relief Unlimited
- Reticle, size 2 MOA
- Optical coating Anti Reflex coating all surfaces. Multi-layer coating for reflection of Pass coating for NVD compatibility
Aimpoint CompM4 & CompM4s Electronic Data:
- Battery Type: AA (You can use ANY AA battery, no special batteries needed!)
- Battery Life, Typical**: 80 000 hours for a Good Quality AA Battery
- Dot Brightness: 16 positions, 7 NVD, 9 daylight (1 is Extra Bright)
Aimpoint CompM4 & CompM4s Mechanical Data:
- Material housing Extruded high strength aluminium
- Surface finish Hard anodized, matte, black
- Material lens covers Rubber, matte, black
- Adjustment 1 click = 16 mm at 100 meters = 1/2" at 80 yds
Aimpoint CompM4 & CompM4s Dimensions:
- Length 120 mm (4.7")
- Width/height 53x60 mm (2.1"x2.4") sight only - 72x72 mm (2.8"x2.8") including mount
- Ring width none
- Weight 265 g (9.3 oz) sight only - 335 g (11.8 oz) with integrated mount
Aimpoint CompM4 & CompM4s Model Information:
- 11972: Aimpoint CompM4 2 MOA with QRP2 Mount, Standard Spacer and Battery included
- 12172: Aimpoint CompM4s 2 MOA with QRP2 Mount, Standard Spacer and Battery included
